Electrochemical Studies of Magnesium Coated with Modified Chitosan and Electrosprayed as an Anticorrosive Protection Method in Bone Repair
DOI:
https://doi.org/10.17488/RMIB.44.2.2Keywords:
Bone Repair, chitosan modified, electrochemical techniques, electrosprayed coatings, magnesiumAbstract
Magnesium (Mg) is essential for the metabolic reactions of the human body and is known for its biocompatibility, its mechanical and physical properties are similar to human bone, which is why it is considered to have high potential in biomedical applications such as temporary and resorbable implants. Through surface modifications, the high tendency to corrosion of Mg could be controlled, such as biodegradable membranes that prevent the passage of chloride ions present in the human organism. To prepare the membrane, solutions of chitosan modified with gelatin and/or glutaraldehyde are used and by means of the electrospray method applied to protect the Mg. To simulate body fluid conditions a Kokubo saline solution (BFK) was prepared. The study focuses on evaluating the corrosion rate of Mg with a coating made of a chitosan electrosprayed membrane, applying electrochemical measurements of electrochemical impedance spectroscopy and linear polarization resistance.
The key additive to improve the behavior of the membranes was observed with the use of gelatin, where the membrane with the best results lowing corrosion rates is the Mg CH+GE+GL system, which it was observed with very good physical integrity in the images of morphological analyzes of the surface after 30 days of exposure.
Downloads
References
N. T. Kirkland, N. Birbilis, M. Staiger, “Assessing the corrosion of biodegradable magnesium implants: a critical review of current methodologies and their limitations,” Acta Biomater., vol. 8, no. 3, pp. 925-936, Mar. 2012. doi: https://doi.org/10.1016/j.actbio.2011.11.014 DOI: https://doi.org/10.1016/j.actbio.2011.11.014
N. Ardila, Z. Ajji, M.-C. Heuzey, A. Ajji, “Chitosan electrospraying: Mapping of process stability and micro and nanoparticle formation,” J. Aerosol Sci., vol. 126, pp. 85-98, Dec. 2018, doi: https://doi.org/10.1016/j.jaerosci.2018.08.010
M. Carboneras Chamorro, C. Iglesias Urraca, E. Onofre Bustamante, M. A. Alobera Gracia, C. Clemente de Arriba, M.C. García Alonso, M. L. Escudero Rincón, “Materiales metálicos biodegradables en el campo biomédico,” Acta Cienc. Tecnol., vol. 19, pp. 30-34, 2011. [Online]. Available: https://core.ac.uk/reader/36133460
] M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, L.G. Johans, “Fundamentals and advances in magnesiun alloy corrosion,” Prog. Mater. Sci., vol. 89, pp. 92-193, Aug. 2017. doi: https://doi.org/10.1016/j.pmatsci.2017.04.011 DOI: https://doi.org/10.1016/j.pmatsci.2017.04.011
Y. Zheng, Magnesium Alloys as Degradable Biomaterials, 1st ed. Boca Ratón: CRC Press, 2019, pp. 600.
Z. Song, G. Yu, Z. Xie, B. Hu, X. He, X. Zhang (2014). “Performance of composite coating on AZ31B magnesium alloy prepared by anodic polarization and electroless electrophoresis coating,” Surf. Coat. Technol. vol. 242, pp. 83–91, Mar. 2014. doi: https://doi.org/10.1016/j.surfcoat.2014.01.022 DOI: https://doi.org/10.1016/j.surfcoat.2014.01.022
V. Valencia Goujon, “Estudio electroquímico de magnesio en medio fisiológico simulado (Kokubo) para su aplicación como biomaterial y uso de tratamientos de modificación superficial anticorrosivos,” Bachelors dissertation, Univ. Nac. Aut. Mex., Mexico City, Mexico, 2013. [Online]. Available: https://repositorio.unam.mx/contenidos/353329
A.S. Paredes, O.S. Orteg, A. González, L. Bustillos, “Análisis comparativo de la regeneración ósea obtenida con quitosano y plasma rico en fibrina,” Acta Odontol. Venez., vol. 52, no. 2, Art. no. 2, 2014. [Online]. Available: https://www.actaodontologica.com/ediciones/2014/2/art-2
C.A. Cárcamo Gatica, “Preparación de films de complejo polielectrolito quitosano-alginato y comparación de sus propiedades mecánicas y biológicas con films de quitosan,” Bachelors dissertation, Univ. Chile, Santiago, Chile, 2005. [Online]. Available: https://repositorio.uchile.cl/handle/2250/105463
A.E. Mochalova, L.V. Nikishchenkova, N.N. Smirnova, L.A. Smirnova, “Thermodynamic properties of chitosan-based hydrogels in the range 0–350 K,” Polym. Sci. Ser. B, vol. 49, pp. 42-46, Apr. 2007. doi: https://doi.org/10.1134/S1560090407010101 DOI: https://doi.org/10.1134/S1560090407010101
Y. Liu, S. Wang, W. Lan, “Fabrication of antibacterial chitosan-PVA blended film using electrospray technique for food packaging applications,” Int. J. Biol. Macromol., vol. 107, no. Pt A, pp. 848–854, Feb. 2018. doi: https://doi.org/10.1016/j.ijbiomac.2017.09.044 DOI: https://doi.org/10.1016/j.ijbiomac.2017.09.044
N.T.-P. Nguyen, L.V.-H. Nguyen, N.T. Thanh, V.V. Toi, T. Ngoc Quyen, P.A. Tran, H.-M. David Wang, T.-H. Nguyen, “Stabilization of silver nanoparticles in chitosan and gelatin hydrogel and its applications,” Mater. Lett., vol. 248, pp. 241–245, Aug. 2019. doi: https://doi.org/10.1016/j.matlet.2019.03.103
H. Quintana-Camacho, J.L. Ramírez-Reyes, A.L. Medina-Almazán, N. García-Navarro, G. Galicia-Aguilar, “Investigation of the corrosion behavior of phophate coating magnesium in a kokubo solution,” Int. J. Electrochem. Sci., vol. 13, pp. 6072-6082, 2018. doi: https://doi.org/10.20964/2018.06.53 DOI: https://doi.org/10.20964/2018.06.53
J.A.S. Moreno, A.C. Mendes, K. Stephansen, C. Engwer, F.M. Goycoolea, A. Boisen, L.H. Nielsen, I.S. Chronakis, “Development of electrosprayed mucoadhesive chitosan microparticles,” Carbohydr. Polym., vol. 190, pp. 240–247, Jun. 2018. doi: https://doi.org/10.1016/j.carbpol.2018.02.062 DOI: https://doi.org/10.1016/j.carbpol.2018.02.062
R.M.D. Soares, N.M. Siqueira, M.P. Prabhakaram, S. Ramakrishna, “Electrospinning and electrospray of bio-based and natural polymers for biomaterials development,” Mater. Sci. Eng. C., vol. 92, pp. 969–982, Nov. 2018. doi: https://doi.org/10.1016/j.msec.2018.08.004
A. Jaworek, A.T. Sobczyk, A. Krupa, “Electrospray application to powder production and surface coating,” J. Aerosol Sci., vol. 125, pp. 57-92, Nov. 2018. doi: https://doi.org/10.1016/j.jaerosci.2018.04.006 DOI: https://doi.org/10.1016/j.jaerosci.2018.04.006
S. Kavadiya, P. Biswas, “Electrospray deposition of biomolecules: Applications, challenges, and recommendations,” J. Aerosol Sci., vol. 125, pp. 182-207, Nov. 2018. doi: https://doi.org/10.1016/j.jaerosci.2018.04.009 DOI: https://doi.org/10.1016/j.jaerosci.2018.04.009
T. Kokubo, “Bioactive glass ceramics: properties and applications,” Biomaterials, vol. 12, no. 2, pp. 155–163, Mar. 1991. doi: https://doi.org/10.1016/0142-9612(91)90194-F DOI: https://doi.org/10.1016/0142-9612(91)90194-F
J.Y. Wong, J.D. Bronzino, D.R. Peterson, Biomaterials: Principles and Practices, 1st Ed. Boca Ratón: CRC Press, 2012, pp. 288. DOI: https://doi.org/10.1201/b13687
A. Zaja̧c, J. Hanuza, M. Wandas, L. Dymińska, “Determination of N-acetylation degree in chitosan using Raman spectroscopy,” Spectrochim. Acta A Mol. Biomol. Spectrosc., vol. 134, pp. 114–120, Jan. 2015. doi: https://doi.org/10.1016/j.saa.2014.06.071 DOI: https://doi.org/10.1016/j.saa.2014.06.071
G.A.S. Kazi, T. Yamanaka, Y. Osamu, “Chitosan coating an efficient approach to improve the substrate surface for in vitro cultura System,” J. Electrochem. Soc., vol. 166, no. 9, pp. B3025- B3030, 2019. doi: http://dx.doi.org/10.1149/2.0051909jes
S. Sobieszcyk, A. Zieliński, “Coatings in Arthoplastiy: Review Paper,” Adv. Mater. Sci., vol. 8, no. 4, Dec. 2008. [Online]. Available: https://www.proquest.com/openview/e71b8f58cff352959f14f9b5dc1f-870d/1?pq-origsite=gscholar&cbl=2016339
B. Pérez-Artacho, E. Sáez-Fernández, G.I. Martínez-Soler, V. Gallardo Lara, J.L. Arias Mediano, “Polímeros biodegradables en el transporte selectivo de moléculas antitumorales,” ARS Pharm. vol. 51, s. 3, pp. 171-176, 2010. [Online]. Available: http://hdl.handle.net/10481/26416
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Revista Mexicana de Ingeniería Biomédica
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Upon acceptance of an article in the RMIB, corresponding authors will be asked to fulfill and sign the copyright and the journal publishing agreement, which will allow the RMIB authorization to publish this document in any media without limitations and without any cost. Authors may reuse parts of the paper in other documents and reproduce part or all of it for their personal use as long as a bibliographic reference is made to the RMIB. However written permission of the Publisher is required for resale or distribution outside the corresponding author institution and for all other derivative works, including compilations and translations.
